However, if the amount of foam in the subsequent glasses is the same, it is possible the keg is not cold enough. A little condensation is normal; this is connected with the difference in temperature. Dry the refrigeration chamber thoroughly when exchanging kegs. If you have used all 10 tubes that were provided with your machine, you may order new tubes from the website www. Remember to keep extra tubes on hand so you may continue using your machine between the moment your order is received and the moment your new tubes are delivered.
Once tapped, the keg may be stored for 30 days at a temperature between 5 and 8 degrees. This is perfectly normal. The product will adjust the temperature to keep your beer perfectly chilled. During this process it will make noise. After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance.
If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre. Your appliance has an anomaly. Unplug the draught beer machine and take it to an approved service centre. You can find a full set of beer brands available on www. Check with your local recycling guidelines to be sure. The number of servings depends on the size of the keg and the size of the glass, which varies from country to country. For a 25cl glass, you could get 4 servings with one litre of beer.
Two litre kegs can be kept inside the appliance for 15 days after opening, 4 and 5 litre kegs can be kept for 1 month. Keep your keg in a cool dark place. If there's room in your fridge, keep a spare keg chilled and ready to use. Beer is not a product that fares well when exposed to below 0 degrees and its quality would also deteriorate. You would also risk the keg leaking. Only the kegs on www. Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point. Find more detailed information in the Warranty section of the website. Cancel Confirm. About T-fal. Forgotten password. Sleep user. Please give us your mail to initialize your password Confirm Cancel. Our Products.
All Products Linen care Steam irons. La vente daccessoires nest pas Disponible en ligne pour la. T-fal - Beertender black user manuals. Frequently asked questions. Or you carb on at time Reply 8 years ago on Introduction.
For a fairly long time. The Beertender uses as Peltier cooling system which is effective at keeping things cold, but not effective at making things cold. So if you stick a room temp mini-keg in there it can take up to 24 hours to chill it.
But if you chill it in your fridge before hand, the Beertender will keep it chilled as long as it is plugged in. I need to look up the adapter, thanks for the heads up. Tamorgen used a Beer Gun regulator adapter and made it work that way. I have moved away from the Edgestar regulator since I had two fail on me :. I think i might just skip the whole edgestar regulator now. Can you verify which one you bought? It really depends on what regulator you are using.
If you bought the kit from Edgestar, you can recieve one of two regulators from what I have heard. I recieved the silver one with a smaller port and used the Adapter 2, with right hand threads, since it was easier to step down. For the other one, I don't know The main difference between the adapter and the adapter 2 is thread size.
The original adapter is a match for the standard CO2 nut. The Adapter 2 comes in both right and left handed threading. Right hand threading will fit the standard CO2 regulator, while left handed will fit a nitrogen regulator which can regulate CO2 as well.
So, I've made the conversion, but I'm having a devil of a time figuring out the threading on the regulator. For now, I'm running the CO2 cartriges, but the first two cartridges leaked like crazy, and I had to go onto the third. The third only got me part way through the keg, so I had to buy more at a local home brew store.
I bought the parts you mentioned for the paintball tank conversion, but my regulator seems to be metric. Problem is, most big box hardware stores have an awful selection of metric, and nothing that converts NPT to Metric. It is likely a M12, but xWhat? I've ordered both the 1.
I'll post what it ends up being once I know for sure. I finally figured out what the fitting is for the CO2 regulator. The problem is the fitting would thread in, but slip, and break the seal. Thats one of the reasons I thought it might be metric that, and the idiot at Home Depot said it was metric. NPT fittings are tapered, and that's why it was slipping.
After ordering and returning different adapters, I finally took the regulator down to my local Ace hardware, and spoke with their plumbing guy. He showed me tapering on the threads. It's easier to see if you look at a 1" NPT fitting. NPT fittings are meant for plumbing water , and not gas. The CO2 regulator is a straight thread, and those threads are harder to find. He suggested I call Roberts Oxygen, but I was told they didn't have anything that small.
I was resigned to perhaps investing in a standard CO2 regulator and tossing the BeerTender adapter aside, just using the plastic parts and tubing.
Next I went to my local Home Brew supply store, and showed the guy there what I had and the issue I was having, and we went over to their fitting shelves, and they had several pieces that fit the Edgestar adapter. Armed with that new knowledge and the adapter, I went to Home Depot, got the coupling, some gas fitting thread tape teflon is not for gas , and built the adapter.
Now, I can finally hook my paintball tank up to my Beertender. Introduction: Krups Beerteender Conversion. I have installed the draught beer machine and loaded a keg on it. How do I know the beer is ready to be served? Does the machine need to be switched on all the time it is in use? How long does it take to chill a keg? Do I have to wait until the temperature indicator turns green before I pour?
Pouring before the keg is fully chilled will produce a lot of foam. We don't recommend it. Should I temporarily store a tapped keg in my refrigerator? Where should I place the draught beer machine? Maintenance and cleaning. How can I clean my appliance? Technical support. I hear a short noise when I close the door or whenever I draw a beer - is this normal? When I try to draught a beer all I get is foam. When I try to draw a beer, no beer comes out.
Is it normal if the first glass drawn from the keg is full of foam? There is condensation in the refrigeration chamber. Can I adjust the temperature of the drink? My product makes noise while cooling a keg; is that normal? What should I do if my appliance is not working?
What should I do if the power cord of my appliance is damaged? Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre. Various topics.
What brands of beer are available? Are the kegs recyclable? How many servings of beer does the keg hold? Is it possible to use the kegs without a machine? Only 5-litre kegs can be used without a machine.
For how long a time can I keep my beer after opening? How should I store my keg? Can I put my keg in the freezer to speed up chilling? Can the product accommodate other drinks? Do I need a CO2 cartridge to use the machine? How can I chill the kegs? Can the machine be used in a caravan or on a boat? Yes, if a V socket is available.
Can the keg be transported?
0コメント